The B4 range is designed for simple manual and automatic applications. Easy-to-use temperature control, large tank lid for easier loading. The design of the pneumatic unit-pump ensures that the pressure of the adhesive is even and does not fluctuate.
Kit Includes Meler B4-P Melter unit twin outlets with 3.6mtr hose and swirl gun
- Four-litre tank with melting rate of 6kg/h and 7cc/stroke pump
- Single-phase 230V 50Hz, max 16 A power supply
- External temperature OK output signal
- External stand-by activation input signal
‘Plug and work’
The B4 has been specifically to suit manual and “low cost” automatic applications. The unit will melt adhesive at a maximum rate of 6kg per hour.
Two Pump Styles
The gear pump version has a maximum pumping rate of 6kg per hour and a pressure relief valve to ensure a smooth delivery of the adhesive. The relief valve is easily adjusted from the outside of the melter. The piston pump version has a maximum pumping rate of 65kg per hour. The pressure regulator and gauge are also accessible from the outside of the melter allowing for easy adjustment.
Electronic Control unit
The electronic control of the B4 has been developed using the same proven design principles of all the new Meler products and it’s simple and reliable operation provides temperature control from 40 oC to 200 oC with an accuracy of ± 0.5 oC.
Hose Connections
The B4 has two hydraulic and electrical hose connections to the rear of the unit. The hydraulic connections are industry standard 9/16 JIC and the electrical connections are available in the compatible form of PT100 or Ni120.
Tank
The melting tank of the B4 has a large surface area which gives an optimal melting rate. The tank has a large lid for loading adhesive and has a filter and drain valve for ease of maintenance.
Pump Motor
The B4 gear unit has a stop/start switch for the motor and an external electrical input for automatically starting the pump motor by the main machine.
Compatibility
Compatibility is one of the main characteristics of B4 melters. They have been designed to be compatible with either PT100 or Ni120 temperature sensors and can therefore replace most hot melt equipment in the market.
Why use our Hotmelt Machine?
- 100% Solvent free with our Timbond H509 Hotmelt Adhesive.
- 0% Emissions
- Ease of application
- The safer system takes away the requirement for Spray booths, extraction or PPE. Safer for your team and more cost effective.
- Cost effective with its even coverage and only requires a one sided stick (applying the glue to one surface instead of both, using half the amount of glue).
- Flexible Hire. Hire for that one off project or long term with our flexible plans to suit your needs.
Interested in how this machine could work on your application? Contact us today to find out more. Demos available on request.
