Tensor L12. Specifically formulated and highly engineered adhesive for building up curved structures when using flexiply or mdf, It removes the need f... Read More
Tensor L12. Specifically formulated and highly engineered adhesive for building up curved structures when using flexiply or mdf, It removes the need for reliance on mechanical fastenings and the use of traditional methods.
With its incredible high tack adhesive Tensor L12 is ideal for bonding backing boards to Corian or similar solid surface material. Can be used for plastic laminates. Can be used in demanding applications. Tensor L12 has very good heat resistance, easy to apply and is economic in use.
Tensorgrip L12 is a fast drying contact adhesive with good heat resistance. It is suitable for bonding a variety of materials to sheet timber, metal and some hard plastics. Immediate permanents bonds can be achieved by double-sided applications on most substrates. Its tacky pressure-sensitive properties make it ideal for think substrate bonding and wood panel buildups.
Always test Tensorgrip L12 to determine suitability for your particular application prior to use in production. NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, expanded/extruded polystyrene, PE or PP.
Material Safety Data Sheets and Technical Data Sheets must be read and understood before use.
Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. For best results the temperature of the adhesive and the surfaces being bonded should be between 16°C - 27°C
When possible we recommend shaking the aerosol well before using. Attach and secure hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check leaks during this process. Unlock the trigger on the spray gun to start spraying.
Prior to use check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates.
Spray about 10-20cm away at a 90° angle to the surface applying a uniform even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfer to the knuckle when touched.
Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.
For removing excess glue use Tensorgrip C101.
Shelf life: 18 months from date of manufacture.
Do not store at temperatures over 50°C. For optimum performance store at 18°C during use but must always be above 10°C
Avoid exposure to direct sunlight. Do not store directly on concrete floor.
Added To Basket
Free delivery on orders over £100.00 placed before 3.30PM